Australia

Home › Floor coverings › Installing › Tiles and stone

Tiles and stone over Warmboard

Nine tested assemblies

Tiles and stone

Tiles and stone over Warmboard must meet the same tiling requirements as over any timber subfloor. In Australia, tile to AS 3958.1 and waterproof wet areas to AS 3740.

Warmboard Inc gives instructions for nine assemblies, tested by the Tile Council of North America (TCNA) with the Robinson floor test, by the product makers, or both.

Large floor tiles being laid over Warmboard-S in a renovation

Tested assemblies

  • 1. Backer board:
    Thin-set over the panel, backer board screwed down across the panels, joints taped, then thin-set and tiles. TCNA extra heavy.
  • 2. Mortar bed (Mapei):
    Slip sheet, wire mesh lath and a 19 mm minimum mortar bed. TCNA extra heavy.
  • 3. Self-levelling underlay (Mapei):
    Primer, wire mesh lath and at least 10 mm of Ultraplan Easy. TCNA extra heavy.
  • 4. Uncoupling membrane (Blanke):
    PERMAT bedded in Granirapid. TCNA light commercial.
  • 5. Uncoupling membrane (Mapei):
    Mapeguard UM bedded in Granirapid. TCNA light commercial.
  • 6. Uncoupling membrane (Schluter):
    DITRA or DITRA-XL over PRIMER-U and ALL-SET. Schluter approved.
  • 7. Uncoupling mat (RedGard):
    RedGard mat bedded in Granirapid. Custom Building Products approved.
  • 8. NXT Level (Laticrete):
    Prime-N-Bond, wire mesh lath and NXT Level. Laticrete approved.
  • 9. STRATA_MAT (Laticrete):
    Prime-N-Bond and STRATA_MAT in Platinum 254. Laticrete approved.
Cement sheet laid over Warmboard-S ready for tiling in Ballarat, Victoria

Fixing without hitting the pipes

When screwing down backer board, trace the pipe pattern onto clear polyethylene laid over each panel, then lay the stencil on the board and mark the screw positions through it.

Lay backer board across the panels, stagger the joints, and follow each maker’s instructions for their products. Floor surface temperature must not exceed 29 °C.

Ready to plan your floor?

Send us your plans. Warmboard’s design team will draw your panel layout and pipe loop plan, and we’ll prepare your quote.