Australia

Home › Floor coverings › Installing › Carpet

Carpet over Warmboard

Keep the R-value low

Carpet over Warmboard

Carpet and underlay laid straight over Warmboard is very common. Choose a combination with a low total R-value, about 0.35–0.44 m²K/W, so the heat isn’t held back.

Avoid prime urethane and bonded urethane underlays: their R-values are high.

Woman relaxing on a warm timber floor, with a cutaway showing the Warmboard panel and pipe beneath

Getting it right

Fill empty channels

Fill any empty channels with levelling compound, or offcuts of pipe fixed in place, so the surface is flush.

Test first

Don’t lay underlay or carpet until every loop has been pressure tested.

Typical R-values

Carpet 6–25 mm: about 0.18–0.39. Rubber underlay 6–13 mm: 0.05–0.23. Fibre or jute 6–13 mm: 0.17–0.38 m²K/W.

Ready to plan your floor?

Send us your plans. Warmboard’s design team will draw your panel layout and pipe loop plan, and we’ll prepare your quote.