Australia

Home › Products › Panels

Warmboard radiant panels

Warmboard-S and Warmboard-R

How the panels work

Every Warmboard panel has a 0.64 mm skin of conductive aluminium bonded across the whole top surface, including the pipe channels. The aluminium spreads heat from the pipe across the floor, so the floor warms evenly and quickly at lower water temperatures.

The channels hold 16 mm PEX-AL-PEX pipe firmly at 300 mm spacing. The routed panel types set the pipe route as the panels go down.

End view of a Warmboard panel with the pipe seated in its aluminium-lined channel

Two panels

Warmboard-S

Structural subfloor panel: 7-ply Douglas fir plywood, 1220 × 2440 × 28.6 mm. Laid over joists at 406.6 mm centres, over sleepers or over a slab. Four panel types: left turn, right turn, straight and double. About 43 kg per panel (about 14.5 kg/m²); about 15 kg/m² with pipe and water (Warmboard Inc).

Warmboard-R

Radiant panel for renovations: OSB, 610 × 1220 × 20.6 mm. Laid over an existing floor or slab on 1.7 mm reflective foil. Two panel types: turn and straight. About 11.5 kg per panel with pipe and water, about 15.6 kg/m² (Warmboard Inc).

Filler panels

Plain panels without aluminium fill areas with no pipe, such as under joinery.

Custom routing

Extra channels can be routed on site with the supplied templates and router bit.

Installation

Step-by-step instructions for each panel, over joists, existing floors and slabs.

Ready to plan your floor?

Send us your plans. Warmboard’s design team will draw your panel layout and pipe loop plan, and we’ll prepare your quote.